10 Best Floor Jacks Review 2018 [with Buying Guide]

Jacks are used to lifting up vehicles to perform different functions. Floor Jack is the most common type of Jacks. It is usually used for maintenance and repairs.

When buying a Floor Jack, you should know what kind of Floor Jack you are getting.

They have different specifications and are designed to work according to specific usage instructions.

There are several Floor Jacks available in the market. Thus, it can be a bit tricky for you to choose the best floor jack for you in every respect.

It is nuisance to see a number of Floor Jacks available and not being able to make an informed choice.

Don’t have enough time to read the whole article?

Don’t worry!! I’ve picked out 3 of the 10 best choices for you right below:

Comparison Chart of the 3 best-Recommended Floor Jacks

Best of the bestBest ValueAlso Great
Blackhawk b6350
Jegs 80077
Arcan alj3t
(3.9 / 5)

(4.6 / 5)
(4.5 / 5)

Lifting capacity: 3.5 tons


Lifting capacity: 3 tons


Lifting capacity: 3 tons


Minimum saddle Height: 5.5"


Minimum saddle Height: 3.5"


Minimum saddle Height: 3.6"


Maximum Saddle Height: 22"


Maximum Saddle Height: 19.25"

Maximum Saddle Height: 19.4"


Overload Valve


Overload Valve


Overload Valve


No Hydraulic Lift


Hydraulic Lift


Hydraulic Lift

Let’s see why it is recommended as the Best Floor Jack

#Best of the best: Blackhawk B6350 Floor Jack with 3.5-ton Capacity

Blackhawk b6350
Blackhawk B6350 Black/Red Fast Lift Service Jack - 3.5 Ton Capacity
(3.9 / 5)
The lift height capacity of the Blackhawk B6350 is almost 22 inches. This gives you a lot of space to work underneath your car.

Pros

  • Takes little time to reach maximum saddle height
  • Has an astonishingly high lifting range
  • Takes only 4 seconds to set down the load
  • The saddle is rubber padded
  • Over-pumping bypass device
  • Easy, detachable and comfortable to use the handle
  • Side frames designed to prevent twisting under load

Cons

  • Not quite portable
  • Cannot be used as a roadside jack
  • Casters are relatively small
  • The quick lift technology only works till the lifting point
  • Rubber padding is not very secure

Why is it for?

It is one of the best floor jacks for SUVs and light trucks weighing between 5,000 and 7,000 pounds.

#Best Value: JEGS 80077 3 Ton Low Profile Aluminum Floor Jack for Racing Car

Jegs 80077
3 Ton Low-Profile Aluminum Racing Car Auto Floor Jack 6000 lbs Limit JEGS 80077
(4.6 / 5)
This product is designed in the form of a racing car and is used for them as well. The minimum saddle height of JEGS 80077 is 3.5”.

Pros

  • Made from high-grade aluminum
  • Features reinforcing side plates, aluminum caster wheels
  • Can be rotated through a full 360 degrees
  • Easy to maneuver
  • Weighs 58 pounds
  • Can be used as a roadside jack as well

Cons

  • The padding disintegrates quickly
  • Takes lots of strokes to reach a maximum height

Why is it for?

With its minimum saddle height being 3.5”, this floor jack is perfect for racing cars.

#Also Great: Arcan ALJ3T Aluminum Floor Jack with 3 Ton Capacity

Arcan alj3t
Arcan ALJ3T Aluminum Floor Jack - 3 Ton Capacity
(4.5 / 5)
Made from aluminum, it is a lightweight jack. It has a dual piston mechanism. You can reach the maximum height in just 12 strokes.

Pros

  • Lightweight, weighing just 56 pounds
  • High-quality caster wheel system
  • Reinforced side plates and lever arm
  • Quick rise dual piston pumps
  • Has overload valves
  • Saddle plate easily replaceable if worn out
  • Comes with a side-mounted handle

Cons

  • Rubber padding over the saddle plate doesn’t fit well
  • Little less sturdy when compared to other jacks

Why is it for?

This 3-ton capacity floor jack can lift most road vehicles. It can also lift a standard-size sports utility vehicle.

Want to read more about the whole 10 Floor Jacks in the list?

Let’s dive into the details now and learn why these are the best Floor Jacks

This article will definitely save you loads of time and effort when choosing the Floor Jack best suited for your needs!

1. Blackhawk B6350 Fast Lift Floor Service Jack with 3.5-ton Capacity

Blackhawk b6350
Blackhawk B6350 Black/Red Fast Lift Service Jack - 3.5 Ton Capacity
(3.9 / 5)
The lift height capacity of the Blackhawk B6350 is almost 22 inches. This gives you a lot of space to work underneath your car.

Blackhawk B6350 has a 3.5-ton lifting capacity. That is great if you have a very heavy vehicle.

The lift height capacity of the Blackhawk B6350 is almost 22 inches. This gives you a lot of space to work underneath your car.

The Blackhawk B6350 goes up quickly until the saddle reaches the load. After that, it starts lifting the car carefully to keep it safe. The release valve lets the jack go back down in just 4 seconds.

Blackhawk b6350
Credit: Amazon.com

Pros

  • Takes little time to reach maximum saddle height
  • Has an astonishingly high lifting range
  • Takes only 4 seconds to set down the load
  • The saddle is rubber padded
  • Over-pumping bypass device
  • Easy, detachable and comfortable to use the handle
  • Side frames designed to prevent twisting under load

Cons

  • Not quite portable
  • Cannot be used as a roadside jack
  • Casters are relatively small
  • The quick lift technology only works till the lifting point
  • Rubber padding is not very secure

Blackhawk b6350
Credit: Amazon.com

Why is it for?

It is a good floor jack for SUVs and light trucks weighing between 5,000 and 7,000 pounds.

2. JEGS 80077 3 Ton Low Profile Aluminum Floor Jack for Racing Car

Jegs 80077
3 Ton Low-Profile Aluminum Racing Car Auto Floor Jack 6000 lbs Limit JEGS 80077
(4.6 / 5)
This product is designed in the form of a racing car and is used for them as well. The minimum saddle height of JEGS 80077 is 3.5”.

JEGS 80077 is made from Aluminum which keeps it light. It has a strong lift arm and a heavy base. It can lift up to 6,000 pounds of automobiles.

This product is designed in the form of a racing car and is used for them as well. The minimum saddle height of JEGS 80077 is 3.5”.

This works very well for cars with low clearance. The saddle can rotate at 360 degrees. This provides a better working angle.

Jegs 80077
Credit: Amazon.com

Pros

  • Made from high-grade aluminum
  • Features reinforcing side plates, aluminum caster wheels
  • Can be rotated through a full 360 degrees
  • Easy to maneuver
  • Weighs 58 pounds
  • Can be used as a roadside jack as well

Cons

  • The padding disintegrates quickly
  • Takes lots of strokes to reach a maximum height

Jegs 80077
Credit: Amazon.com

Why is it for?

With its minimum saddle height being 3.5”, this floor jack is perfect for racing cars.

3. Arcan ALJ3T Aluminum Floor Jack with 3 Ton Capacity

Arcan alj3t
Arcan ALJ3T Aluminum Floor Jack - 3 Ton Capacity
(4.5 / 5)
Made from aluminum, it is a lightweight jack. It has a dual piston mechanism. You can reach the maximum height in just 12 strokes.

Arcan ALJ3T is a 3-ton floor jack. It can lift up to 6000 pounds. It has a low-profile design.

The minimum saddle height of this jack is 3.75 inches. The maximum saddle height is 18.125″.

Made from aluminum, it is a lightweight jack. It has a dual piston mechanism. You can reach the maximum height in just 12 strokes.

Arcan ALJ3T
Credit: Amazon.com

Pros

  • Lightweight, weighing just 56 pounds
  • High-quality caster wheel system
  • Reinforced side plates and lever arm
  • Quick rise dual piston pumps
  • Has overload valves
  • Saddle plate easily replaceable if worn out
  • Comes with a side-mounted handle

Cons

  • Rubber padding over the saddle plate doesn’t fit well
  • Little less sturdy when compared to other jacks

Arcan alj3t
Credit: Amazon.com

Why is it for?

This 3-ton capacity floor jack can lift most road vehicles. It can also lift a standard-size sports utility vehicle.

4. Liftmaster Hydraulic Trolley Floor Jack with a 2-ton capacity

Liftmaster Hydraulic
Liftmaster Hydraulic Trolley Floor Jack 2 Ton Heavy Duty Car Lift
(3.9 / 5)
Liftmaster Hydraulic Trolley can lift cars up to 2 tons in weight. It has a heavy gauge steel frame which is rust resistant. It comes with a release valve.

Liftmaster Hydraulic Trolley Floor Jack has an adjustable saddle. It can be swiveled 360 degrees. It provides better solid support.

The product weighs around 18 pounds. It has a minimum saddle height of 5″. The maximum saddle height is 13″.

It can lift cars up to 2 tons in weight. It has a heavy gauge steel frame which is rust resistant. Liftmaster Hydraulic Trolley comes with a release valve.

Pros

  • Cheap
  • Light
  • High capacity
  • Rust-resistant frame
  • Has a release valve

Cons

  • Low lift range
  • Cannot do serious work under your car
  • Not very durable
  • Not a high-end tool

Liftmaster Hydraulic
Credit: Amazon.com

Why is it for?

If you are a DIY-er, you will really love this tool. It’s very easy to use. It can lift a fair amount of weight and is pretty cheap.

5. Pittsburgh Automotive 3 Ton Quick Lift Steel Floor Jack

Pittsburgh
Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack
(4.5 / 5)
The minimum saddle height is 2.875 inches. The maximum saddle height is 19.75 inches. It is made from high-grade steel.

Pittsburgh Automotive 3 Ton Quick Lift Steel Floor Jack is durable. It is equipped with several safety features. It can be used both for low profile and high rise vehicles.

The minimum saddle height is 2.875 inches. The maximum saddle height is 19.75 inches. It is made from high-grade steel.

Pittsburgh
Credit: Amazon.com

Pros

  • Has a long lifespan due to strong design
  • Can be used for both low profile and high rise vehicles
  • A universal joint release system is available
  • Has a foam bumper on the bottom end of the handle
  • Has a dual-parallel pump system

Cons

  • A tad bit heavy
  • Has a certain amount of leakage after a few uses
  • Doesn’t come with stands

Pittsburgh
Credit: Amazon.com

Why is it for?

This floor jack is perfect for workshops or garages. It’s suitable for vans, trucks, SUVs, and other heavy vehicles.

It is also suitable for transmission repairs and replacements.

6. Arcan XL20 Black Low Profile Floor Jack with 2 Ton Capacity

Arcan xl20
Arcan XL20 Black Low Profile Steel Service Jack - 2 Ton Capacity
(4.5 / 5)
This product comes with the Universal joint release mechanism which helps with precise control. Its body is made up of heavy duty steel.

Arcan XL20 Black Low Profile is a low profile jack with a 2-ton lifting capacity. It is very compact and pretty lightweight. It has space saving design and dual piston pumps.

This product comes with the Universal joint release mechanism which helps with precise control. Its body is made up of heavy duty steel.

It has a safety valve to prevent overloading. The 45.3 inches long 2 piece handle comes with a bumper pad.

Arcan XL20
Credit: Amazon.com

Pros

  • Compact and space-saving design
  • Dual piston pumps for easy usage
  • Heavy-duty steel construction
  • Safety valve to prevent overloading
  • Inexpensive

Cons

  • Not suitable for heavy-duty vehicles
  • Durability is questionable

Arcan Xl20
Credit: Amazon.com

Why is it for?

It can be used for low-profile vehicles. It is for use at home, not for professional usage.

7. Powerzone 380044 3 Ton Steel & Aluminum Floor Jack for Garage

Powerzone 380044
Powerzone 380044 3 Ton Aluminum and Steel Garage Jack
(4.5 / 5)
The Powerzone 380044 has a safety valve to prevent overloading and a great weight to capacity ratio. It has a fixed front wheel.

Powerzone 38004 floor Jack has a maximum weight limit of 3 tons.

The maximum saddle height is 18.25”. The minimum saddle height is 4”.

It has an aluminum frame and is pretty lightweight. It has a heavy duty steel lift arm and a dual-cylinder hydraulic system.

The Powerzone 380044 has a safety valve to prevent overloading and a great weight to capacity ratio. It has a fixed front wheel. It comes with a two-piece handle which has a foamed lower part.

powerzone 38004
Credit: Amazon.com

Pros

  • Adjustable rear wheels
  • High weight limit
  • Compact design
  • Safety valve to prevent overloading
  • Dual-cylinder hydraulic system

Cons

  • Requires regular lubrication
  • Cannot be used as a substitute for stands

Powerzone 38004
Credit: Amazon.com

Why is it for?

It is for use in homes as well as in garages and workshops. It has a dual-cylinder hydraulic system which makes the lifting easier.

8. Pro-Lift G-737 Quick Lift Garage Floor Jack with 3.5 Ton Capacity

Prolift g737
Pro-Lift G-737 Grey Speedy Lift Garage Jack - 3-1/2 Ton Capacity
(4 / 5)
This product also has a magnetic tool tray for storage of small parts or tools. It has a durable rolled side frame.

Pro-Lift G-737 has a quick lift rate and a 3.5 top weight capacity. It comes with a rubber saddle pad to protect the vehicle from damage.

It has a universal joint release mechanism for superior precision. This product also has a magnetic tool tray for storage of small parts or tools. It has a durable rolled side frame.

Prolift g737
Credit: Amazon.com

Pros

  • Offers a quick lift for professional performance
  • Easy jack positioning and user safety
  • Long term durability
  • Bypass device to prevent over pumping
  • Built-in internal safety valve
  • Rear caster for easy jack positioning

Cons

  • Not easily portable
  • The angle between lifting-stick and jack stand is not too wide
  • Inconvenient to put the jack into the middle line under the car

Prolift g737
Credit: Amazon.com

Why is it for?

The Pro-Lift G-737 floor jack has a capacity of 3 ½ tons. It can lift cars, SUVs, and other vehicles. It cannot be used for low-profile vehicles.

9. Arcan XL2T Low Profile Floor Jack with 2 Ton Capacity

Arcan xl2t
Arcan XL2T Black Low Profile Steel Service Jack - 2 Ton Capacity
(4.5 / 5)
The rated capacity of this floor jack is 2 tons. It has a steel frame, with a weight of around 97 pounds.

The Arcan XL2T is an extra low-profile jack. It has a minimum saddle height of 2.75”.

The maximum saddle height of the floor jack is 22.75”. It takes only 8-9 strokes to reach its maximum height.

The rated capacity of this floor jack is 2 tons. It has a steel frame, with a weight of around 97 pounds.

Arcan xl2t
Credit: Amazon.com

Pros

  • Extra-low profile
  • Fast lifting
  • Lifting height range is good
  • Durable

Cons

  • Is not portable
  • It is pretty heavy

Arcan xl2t
Credit: Amazon.com

Why is it for?

This floor jack can be used for extremely low profile cars, such as racing cars. It cannot lift more than 2 tons, so you cannot lift heavy vehicles with it.

10. Powerbuilt 620479E Xtra Low Profile Floor Jack with 2-Ton Capacity

Powerbuilt 620479e
Powerbuilt 620479E Xtra Low Profile Floor Jack with Safety Bar - 2 Ton Load Capacity
(4.2 / 5)
This product provides a mechanical stop which prevents retraction.It has a weight capacity of 2 tons. It also has two rear swivel caster wheels and a rear-facing handle.

Powerbuilt 620479E Xtra Low Profile jack is a great jack for lowered cars and modified cars. It has a nice surface finish, scratch resistance and is structurally well built.

The minimum saddle height is 2.75”. The maximum saddle height is 15.5” inches. The saddle has a rubber pad on the top.

It has a safety bar which slides under the lifting arm. This product provides a mechanical stop which prevents retraction.

It has a weight capacity of 2 tons. It also has two rear swivel caster wheels and a rear-facing handle.

powerbuilt
Credit: Amazon.com

Pros

  • Has a compact design
  • Wide base
  • Increased stability
  • Safety bar locks
  • Well-suited for lifting any vehicle
  • Highly durable
  • Easy to use
  • Reasonably priced
  • Low maintenance

Cons

  • A tad bit heavy
  • May start leaking if mishandled

Powerbuilt
Credit: Amazon.com

Why is it for?

It is used to lift up extremely low profile cars. It has a weight capacity of 2 ton which limits its usage to lightweight vehicles.

Types of Jacks

There are different types of Jacks. A few of them are as follows:

  • Floor Jacks
  • Scissor Jack
  • Hydraulic Bottle Jack
  • Hi-Lift Jack

Best Floor Jacks Buying Guide

When you are choosing a tool, you need to know what you are looking for.

There are a number of things which a good floor jack should have. The following factors will help you in choosing the right jack for you.

The Floor Jack’s Substance

Floor jacks are made of either aluminum or steel. Steel is more sturdy and safer to use. It is also cheaper.

Aluminum is also strong and reliable. The main difference between the two is that aluminum is lighter and also a bit expensive.

Maximum Lift Weight

You should know what the maximum lifting capacity of the floor jack is.

Make sure you buy a floor jack whose lifting capacity matches your requirements.

Floor Jack’s Speed

The number of strokes taken by the floor jack to reach maximum height determines the speed.

If you need to use the floor jack in a hurry, you need a faster floor jack.

Lowest Height the Floor Jack

The minimum height of the floor jack helps in determining whether it can be used for low profile vehicles.

How High Can It Go?

This is also an important thing to know. If you are working underneath your car, you need to have the right tool to lift the car up.

The Bottom Line

In the above article, I have discussed the features and the pros and cons of the 10 Best Floor Jacks which I found to be the best among several available as per my opinion.

You can compare the above mentioned Best Floor Jacks and choose the one which is tailored perfectly to your needs!